Dron Edge India Private Limited

Minimum order quantity: 100 Piece

The DRON EDGE MINI  fiber optic splice Closures protect fibre optic splices from the elements while providing fast and easy no-cost reentry. The closure comprises a plastic moulded dome shaped housing with fibre management trays attached to an end cap. There are 4 round cable entry ports for the main distribution cable. These ports can be sealed using heat shrink sleeves & a blow torch. No special tools are required for assembly & re-entry.
Available in different configurations, the DRON EDGE MINI  fiber optic splice Closures can accommodate various cable constructions and splice capacities. Each tray is designed to hold a maximum of 12fibers. There is a provision for fiber slack storage (beneath the tray holder) for expressed stranded fiber. The slack storage and splice capacity depends on factors such as cable construction, splice type and slack fiber lengths.

Minimum order quantity: 100 Piece

JC Box/Tiffin Enclosure is one of the pioneers in the industry which is available to the buyers at minimum cost with utmost durability.


Features:

• High in quality
• Ease in usage
• Flexible in nature

Minimum order quantity: 100 Piece

Features:

• Easily accessible for maintenance, changes, and expansion
• Protected against water ingress and harsh conditions
• Suitable for a variety of applications and environments including aerial, pedestal, buried, or underground
• Compatible with existing cable types

Minimum order quantity: 10 Piece

Fiber optic splice closure is the equipment used to offer room to fuse splice optical fiber and also to provide protections for the fused fiber joint point and the fiber cables. Typical fiber optic splice closure and vertical type and horizontal type, there are various kinds of fiber splice closures suit for different applications, such as aerial, duct fiber cables and direct buried. Generally, fiber optic splice closures are used outdoors, some even used underwater. 
Horizontal type splice closures look like flat or cylindrical case. They provide space and protection for optical cable splicing and joint. They can be mounted aerial, buried, or for underground applications. Vertical type of fiber optic splice closures looks like a dome, thus they are also called dome fiber optic splice closure. They meet the same specification as the horizontal types. They are designed for buried applications. 

Minimum order quantity: 100 Piece

We are one of the widely acclaimed manufacturers Fiber Optic joint Closure. The offered fiber optic splice closure is commonly used for joining optical fiber cables.

Minimum order quantity: 100 Piece

Backed by a rich industrial experience, we are engaged in offering a commendable array of 3M 2179CS OFC Joint Closure.

Minimum order quantity: 100 Piece

As per the increasing and altering demands of our valued customers, we offer an innovatively developed Dron Flat Type Optical Splice Closure.

The 2179-CS Fiber Optic Splice Closure is a moulded plastic enclosure used for protecting splices in fiber optic cables. It is suitable for buried, underground, aerial, and pedestal applications. The splice closure has two cable entrance ports on each end and is suitable for short-term pressurization during the flash test.

Minimum order quantity: 1 Piece

Features:

• Single-ended, O-ring sealed dome closure for splicing feeder and distribution cables
• Compatible with most common cable types: e.g. loose tube, central core, ribbon fiber
• FOSC splice trays hinged for access to any splice without disturbing other trays
• Closure can be used in aerial, pedestal and underground (up to 5 meters) environments
• Compatible with CommScope's CWDM modules and optical splitter trays

Minimum order quantity: 10 Piece

Dron Edge Raychem type Joint Enclouser RDSO SPECIFICATION NO. RDSO/SPN/TC/56/2007 Revision 2.0 IP68 Heat shrink type waterproof fiber optical splice closure. 1 oval port+4 round ports; Max 4 trays and 96 cores; Suit for 8-25mm cables; Used for aerial wall mounted, pole mounted, man hole, duct mounting and pipeline, direct buried..etc 

SPECIFICATION NO. RDSO/SPN/TC/56/2007 Revision 2.0
RITES INSPECTION 

Minimum order quantity: 1 Piece

Knowledge of fiber optic splicing methods is vital to any company or fiber optic technician involved in Telecommunications or LAN and networking projects.

Simply put, fiber optic splicing involves joining two fiber optic cables together. The other, more common, method of joining fibers is called termination or connectorization. Fiber splicing typically results in lower light loss and back reflection than termination making it the preferred method when the cable runs are too long for a single length of fiber or when joining two different types of cable together, such as a 48-fiber cable to four 12-fiber cables. Splicing is also used to restore fiber optic cables when a buried cable is accidentally severed.

There are two methods of fiber optic splicing, fusion splicing & mechanical splicing. If you are just beginning to splice fiber, you might want to look at your long-term goals in this field in order to chose which technique best fits your economic and performance objectives.

Minimum order quantity: 01 Piece

3M 2179 CD Fiber Optic Splice Closure protect fiber optic splices from the elements while providing fast and easy no-cost reentry. The closure comprises a plastically molded dome-shaped housing with fiber management trays attached to an end cap. There are 5 round cable entry ports and a single oval cable entry port for the main distribution cable. These ports can be sealed using heat shrink sleeves & a blow torch. No special tools are required for assembly & re-entry.

Minimum order quantity: 1 Piece

Corning Splice Closure (SCF) with Mechanical End Cap is designed for splicing fibers in aerial, duct and buried applications. These sealed canister closures are available in configurations that can accommodate from 72 to 576 single fiber splices, or from a 288 - to 1296 -fiber capacity if splicing ribbons.

Minimum order quantity: 2 Piece

3M 2179CD Joint Closure
The 2179 CD fiber optic splice Closures protect fibre optic splices from the elements while providing fast and easy no-cost reentry. The closure comprises a plastic moulded dome shaped housing with fibre management trays attached to an end cap. There are 5 round cable entry ports and a single oval cable entry port for the main distribution cable. These ports can be sealed using heat shrink sleeves & a blow torch. No special tools are required for assembly & re-entry. Available in different configurations, the 2179 CD can accommodate various cable constructions and splice capacities. Each tray is designed to hold a maximum of 24 fibers. There is a provision for fiber slack storage (beneath the tray holder) for expressed stranded fiber. The slack storage and splice capacity depends on factors such as cable construction, splice type and slack fiber lengths. 

Minimum order quantity: 1 Piece

Product Description4 cable entry ports, each with multi-cable capability
• 96 single fiber/144 mass splice capacity
• 19" long by 8" diameter*
• Capacity of up to 8 drop cables in addition to a feed-through cable
• Compact size for FTTH applications
• Accessories available for a wide variety of applications

Minimum order quantity: 5 Piece

We are one of the reliable manufacturers of optical fibre cable splice closure, which is available in compact construction. This has been manufactured as per the latest state-of-the-art technology . The splice box can be opened in various single entry ports and one oval port. These ports are sealed and can be opened by cutting as per the application